How to solve the auto reboot for a new H2000

Answer:

Scenario 1: Make sure the basic radio paramter configured.

Reboot log:

Parameter example:

Scenario 2:

Make sure the eNB technology is TDD or FDD.

Align the parameter as per TDD and FDD separately:

Reboot log:

Parameter rule:

For example for TDD parameter:

Scenario 3: Make sure the S1 link status, if the S1 link is not established or instable, make sure the parameter “S1RetryMaxNum” is 0.

Scenario 4: SyncFailureHandling is configured as “restart” and clock sync failure. It’s better to change it to “ignored”

Scenario 5: Make sure the eth1 interface is not configured as service interface and cause failed to get WAN IP and reboot.

Log:

Parameter config: